abstract.jpg

Solidblocks

Solidblocks

Kugelhahn-Typ-AST.png.webp

Block type x-mas tree designed for two or more x-mass tree valves in same body block. Can be implemented correspondingly in the most different configurations, according to customer specifications. Besides compact design and the use of forged steels, combinations of proven ball valves and gate valves are possible, or can be equipped completely with ball valves and gate valves. In order to facilitate operability of manual valves, drives, if used, can also be mounted on the backside.


Information sheet wellheads

https://www.hartmann-valves.com/wp-content/uploads/2018/11/HARTMANN-Bohrlochkoepfe-EN1.pdf


Manufacturing program

  • Christmas tree combination “Solid Block” construction

  • Design: T and Y design

  • Valves: Ball valves and shut-off sliders, as well as combined

  • Activation: Hand wheel, transmission, or drive combined

  • Through bore hole: 2 1/16“ – 6 3/8“ ( DN 52 – DN 162 )

  • Pressure level: up to API 10.000 ( 690 Bar )

  • Connector flange bottom: to 13 5/8“ ( additional sizes upon request )

  • Connector flange top: to 7 1/16“

  • Connector flange to side: to 7 1/16“

  • MC: AA, BB, CC, DD, EE, FF, HH

  • TC: K – Y ( -46 °C bis +345 °C )

Other designs upon request!

Block type x-mas tree designed for two or more x-mass tree valves in same body block. Can be implemented correspondingly in the most different configurations, according to customer specifications. Besides compact design and the use of forged steels, combinations of proven ball valves and gate valves are possible, or can be equipped completely with ball valves and gate valves. In order to facilitate operability of manual valves, drives, if used, can also be mounted on the backside.


Information sheet wellheads

https://www.hartmann-valves.com/wp-content/uploads/2018/11/HARTMANN-Bohrlochkoepfe-EN1.pdf


Manufacturing program

  • Christmas tree combination “Solid Block” construction

  • Design: T and Y design

  • Valves: Ball valves and shut-off sliders, as well as combined

  • Activation: Hand wheel, transmission, or drive combined

  • Through bore hole: 2 1/16“ – 6 3/8“ ( DN 52 – DN 162 )

  • Pressure level: up to API 10.000 ( 690 Bar )

  • Connector flange bottom: to 13 5/8“ ( additional sizes upon request )

  • Connector flange top: to 7 1/16“

  • Connector flange to side: to 7 1/16“

  • MC: AA, BB, CC, DD, EE, FF, HH

  • TC: K – Y ( -46 °C bis +345 °C )

Other designs upon request!

Típusok

Heading 2

Heading 2

Kugelhahn-Typ-AST.png.webp